MiraculeWater Filtration Process Explained
MiraculeWater Filtration System has 5 filter stages to purify the water you drink.
• We use Magnesium prill beads to re-balance pH of the water after Reverse Osmosis filtration proccess.
• We use a modern RO (Reverse Osmosis) membrane that lowers TDS (Total Dissolved Solids).
• Our filters reduce Hexavalent Chromium and Arsenic.
• All of our filters are all NSF Certified to ensure your getting top quality filtration.
• Every unit is made in U.S.A and individually tested for quality before being shipped to you.
• We use strong magnets to filter out heavy metal particles that may be in the water supply.
STAGE 1 - 5 micron reduces sediments, Chlorine taste and odor.
STAGE 2 - .5 micron reduces lead, reduces cysts ( Giardia Lamblia and Cryotisoirudium) and further reduces chlorine taste/odor.
STAGE 3 - .2 micron Ceramix Carbon Block Filter catches extremely small particles up to .2 microns.
STAGE 4 - NSF Certified RO Membrane and Magnesium prill beads Ph Balancing.
STAGE 5 - Coconut Shell polishing filter with frequencies.
PART 6 - Strong magnet and the post filter.
PART 7 -3 Gallon Standard Reverse Osmosis Reservoir Tank.
PART 8 - ERP-500 permeate pump increases efficiency and pressure creating a 4:1 wastewater ratio instead of 8:1 like a standard reverse.
PART 9 - Note: You will need to have at least 70 psi water pressure at your incoming source water for the Miracule system to work properly. Otherwise, you will need an Aquatec Pressure Booster Pump.